77 • vacon parameter descriptionsTel. +358 (0)201 2121 • Fax +358 (0)201 21220599.11 Easy usage menu (Control panel: Menu PAR -> P9)13.2 DRIVE SETUPWith this parameter you can easily set up your drive for four different applica-tions.Note! This parameter is only visible when the Startup Wizard is active. Thestartup wizard will start in first power-up. It can also be started as follows.See the figures below.NOTE! Running the startup wizard will always return all parametersettings to their factory defaults!Figure 9.17: Startup wizardFAULTALARMSTOPREADY RUNREFMONPARFLTFAULTALARMSTOPREADY R UNREFMONPARFLTFAULTA LARMSTOPREADY RUNREFMONPA RFLT rp mPush to enter edit mode Select motornominal speedand pushto confirm.Press STOPfor 5 secondsin main menu143PERFORM THE SAMEPROCEDURE FOR PAR. 1.4,MOTOR NOMINAL CURRENT5 PERFORM DRIVE SETUP,PAR. 13.2, SEE NEXT PAGE2Alternatesin the display
