Vacon 100 Applications Manual

Also see for 100 INDUSTRIAL: Installation instruction Installation manual Installation manual Installation manual User manual

Contents

Vacon 100 Applications Manual Manual pdf 33 page image

Keypad of the drive vacon • 3024-hour support +358 (0)201 212 575 • Email: vacon@vacon.com22.6.1 Quick setupThe Quick Setup group includes the different wizards and quick setup parameters of the Vacon100 Application. More detailed information on the parameters of this group you will find inchapter 3.2.2.6.2 MonitorMulti-monitorNOTE: This menu is not available in text keypad.On the multi-monitor page, you can collect four to nine values that you wish to monitor Thenumber of the monitored items can be selected with parameter 3.11.4.Figure 16. Multi-monitoring pageChange the monitored value by activating the value cell (with arrow buttons left/right) andclicking OK. Then choose a new item on the Monitoring values list and click OK again.Trend curveThe Trend Curve feature is a graphical presentation of two monitor values at a time.BasicThe basic monitoring values are the actual values of selected parameters and signals as wellas statuses and measurements.I/OStatuses and levels of various input and output signal values can be monitored here. See chap-ter 3.3.4.Extras/AdvancedMonitoring of different advanced values, e.g. fieldbus values. See chapter 3.3.6.Timer functionsMonitoring of timer functions and the Real Time Clock. See chapter 3.3.7.PID Controller ( 4 )( 21 )ID: M1STOP READY I/O( 12 ) (7)(13)STOP READY I/OID: M2.10.0rpmSTOP READY I/O0.00 HzID250.00Hz0.00A 0.00%20.0 Hz0.0V0.0V 81.9°C 0.0%ID:1 M2.1.1.1STOP Ready I/O0.00 Hz10.00 Hz0.00 rpm0.00 A0.00 %0.00 %9171.emfMain MenuQuick SetupParametersMonitorMonitorMultimonitorBasicTimer functionsMultimonitorFreqReferenceOutput FreqMotor Curre Motor Torque Motor VoltageMotor SpeedMotor TemperaUnit TemperaDC-link voltFreqReferencFreqReferenceOutput frequencyMotor PowerFreqReferenceMotor SpeedMotor CurrentMotor Torque