8.3 USER LEVELSUse the User level parameters to keep the personnel who are not approved from makingchanges in the parameters. You can also prevent accidental changes in the parameters.When you make a selection of a user level, the user cannot see all the parameters on thedisplay of the control panel.Table 58: The user level parametersIndex Parameter Min Max Unit Default ID DescriptionP8.1 User Level 0 1 0 11940 = Normal.1 = Monitoring. Onlythe monitoring, favour-ites and user levelmenus are visible inthe main menu.P8.2 Access Code 0 9 0 2362If you set the value tobe to other than 0before you go to Moni-toring from, for exam-ple, Normal, you haveto give the access codewhen you go back toNormal. This preventspersonnel who are notapproved from makingchanges in the param-eters on the controlpanel.CAUTION!Do not lose the access code. If the access code is lost, contact your nearest servicecenter or partner.CHANGING THE ACCESS CODE OF THE USER LEVELS1 Go to the User levels.2 Go to the item Access code and push the arrowbutton Right. STOP READY ALARM KeypadMain MenuNormalUser level00000Access codeP8.2ID:2362USER SETTINGS, FAVOURITES AND USER LEVEL MENUS VACON · 10324-HOUR SUPPORT +358 (0)201 212 575 · EMAIL: VACON@VACON.COM 8
