1 QUICK STARTUP GUIDE1.1 CONTROL PANEL AND KEYPADThe control panel is the interface between the AC drive and the user. With the control panel,you can control the speed of a motor and monitor the status of the AC drive. You can also setthe parameters of the AC drive.A B CIH DG F EFig. 1: The buttons of the keypadA. The BACK/RESET button. Use it to moveback in the menu, exit the Edit mode,reset a fault.B. The arrow button UP. Use it to scroll themenu up and to increase a value.C. The FUNCT button. Use it to change therotation direction of the motor, accessthe control page, and change the controlplace. See more in Table 12 Controlreference settings.D. The arrow button RIGHT.E. The START button.F. The arrow button DOWN. Use it to scrollthe menu down and to decrease a value.G. The STOP button.H. The arrow button LEFT. Use it to movethe cursor left.I. The OK button. Use it to go into an activelevel or item, or to accept a selection.1.2 THE DISPLAYSThere are 2 display types: the graphical display and the text display. The control panel alwayshas the same keypad and buttons.The display shows this data.• The status of the motor and the drive.• Faults in the motor and in the drive.• Your location in the menu structure.QUICK STARTUP GUIDE VACON · 1124-HOUR SUPPORT +358 (0)201 212 575 · EMAIL: VACON@VACON.COM 1
