250 Vehicle careground. Do not raise the jack anyfurther.5. Unscrew the wheel nuts.6. Change the wheel. Spare wheel3 250.7. Screw on the wheel nuts.8. Lower the vehicle and removejack.9. Install the wheel wrench ensuringthat it locates securely and tighteneach nut in a crosswisesequence. Tightening torque is140 Nm.10. Align the valve hole in the wheelcover with the tyre valve beforeinstalling.Install wheel nut caps.11. Stow the replaced wheel 3 250and the vehicle tools 3 236.12. Check the tyre pressure of theinstalled tyre and the wheel nuttorque as soon as possible.Have the defective tyre renewed orrepaired as soon as possible.Jacking position for lifting platformRear arm position of the liftingplatform under the rear recess of thesill.Front arm position of the liftingplatform at the underbody.Spare wheelSome vehicles are equipped with atyre repair kit instead of a sparewheel.If mounting a spare wheel which isdifferent from the other wheels, thiswheel might be classified as atemporary spare wheel and thecorresponding speed limits apply,even though no label indicates this.Seek the assistance of a workshop tocheck the applicable speed limit.The spare wheel has a steel rim.CautionThe use of a spare wheel that issmaller than the other wheels or incombination with winter tyrescould affect driveability. Have thedefective tyre replaced as soon aspossible.
