Driving and operating 131Alternatively accelerate to the desiredspeed and briefly turn thumb wheel toSET/-: the current speed is stored asmaximum speed. Speed limit isdisplayed in the Driver InformationCentre.Change speed limitWith speed limiter active, turn thumbwheel to RES/+ to increase or SET/-to decrease the desired maximumspeed.Exceeding the speed limitIn the event of an emergency it ispossible to exceed the speed limit bydepressing the accelerator pedalfirmly beyond the point of resistance.The limited speed will flash in theDriver Information Centre and achime sounds during this period.Release the accelerator pedal andthe speed limiter function isreactivated once a speed lower thanthe limit speed is obtained.DeactivationPress button y: speed limiter isdeactivated and the vehicle can bedriven without speed limit.The limited speed is stored and acorresponding message appears inthe Driver Information Centre.Resume limit speedTurn thumb wheel to RES/+. Thestored speed limit will be obtained.Switching offPress button L, the speed limitindication in the Driver InformationCentre extinguishes. The storedspeed is deleted.By pressing button m to activatecruise control or by switching off theignition, speed limiter is alsodeactivated and the stored speed isdeleted.Parking assistRear parking assist9 WarningIt is the driver who bears fullresponsibility for the parkingmanoeuvre.Always check the surroundingarea while reversing and using therear parking assist system.