Vehicle care 161Fit light assembly with theretaining pins into the recesses ofthe vehicle body and tighten thesecuring nut from inside the loadcompartment. Pull the circulargasket over the recess in the lamphousing.Close cover and engage.Reversing light/rear fog lightReversing light is located on the rightside of the bumper, and the rear foglight is located on the left side of thebumper for left-hand drive vehicles,and vice versa for right hand drivemodels.The description of bulb replacementis the same for both.1. Undo screw and remove cover.2. Undo screw and remove lightassembly from the bumper.3. Disengage and remove the bulbsocket by turning anticlockwise.