Vega VEGAPULS 69 Operating Instructions Manual

Also see for VEGAPULS 69: Operating instructions Mounting instructions Product information Quick setup guide Operating instructions

Contents

406 Set up with the display and adjustment moduleVEGAPULS 69 • 4 … 20 mA/HART - two-wire47247-EN-150211– Move to the menu overview– Confirm selected menu– Edit parameter– Save value• [->] key:– Presentation, change measured value– Select list entry– Select menu items in the quick setup– Select editing position• [+] key:– Change value of the parameter• [ESC] key:– Interrupt input– Jump to next higher menuThe instrument is adjusted via the four keys of the display and adjust-ment module. The LC display indicates the individual menu items. Thefunctions of the individual keys are shown in the above illustration.Approx. 60 minutes after the last pressing of a key, an automatic resetto measured value indication is triggered. Any values not confirmedwith [OK] will not be saved.6.3 Measured value indication - Selectionnational languageWith the [->] key you move between three different indication modes.In the first view, the selected measured value is displayed in largedigits.In the second view, the selected measured value and a correspond-ing bar graph presentation are displayed.In the third view, the selected measured value as well as a second se-lectable value, e.g. the temperature of the electronics, are displayed.During the initial setup of an instrument shipped Ex works,use the"OK" key to get to the menu "National language".This menu item is used to select the national language for further pa-rameter adjustment. You can change the selection via the menu item"Setup - Display, Menu language".With the "OK" key you move to the main menu.Adjustment systemMeasured value indica-tionSelection of nationallanguage