WAGO MOVILINK SPEEDWAY 767 Manual

14 Important Notes WAGO-SPEEDWAY 767767-5204 MOVILINK® Interface (RS-232, RS-485)ManualVersion 1.1.0Pos : 16.22 /Serie 767 ( WAGO-SPEED WAY)/Wichtige Erläuter ung en/I/O-Modul /Hinweise z um Betri eb 767- xxxx, Teil 1 @ 7\mod_1266921815843_21.doc x @ 51219 @ 2 @ 12.4 Notes on OperationWhen integrating the 767 module in your machine or system, all the currentlyapplicable norms, regulations and guidelines shall be observed during allactivities: for example, BGV A3, “Electrical systems and equipment”,DIN EN 418, EN 60204. The emergency stop equipment shall remain effective inall operating modes of the system and machine.For protection from electromagnetic interferences• Connect your system to protective earth (PE), andPos : 16.23 /Serie 767 ( WAGO-SPEED WAY)/Wichtige Erläuter ung en/I/O-Modul /Hinweise z um Betri eb 767-I/O, T eil 2 @ 5\mod_1248180225875_21.doc x @ 38755 @ @ 1• Ensure that the cable routing and the installation of the fieldbus cable, S-BUS cable, supply cable, and sensor or actuator cable are correct.Pos : 16.24 /Serie 767 ( WAGO-SPEED WAY)/Wichtige Erläuter ung en/I/O-Modul /Hinweise z um Betri eb 767- xxxx, Teil 3 @ 7\mod_1266921848140_21.doc x @ 51222 @ @ 1The following elements for 24 V supply shall be present:• Outer lightning protection on buildings• Inner lightning protection of supply lines and signal lines• Safe electrical separation of low voltage 24 VDC through PELV (ProtectiveExtra Low Voltage) or SELV (Safety Extra Low Voltage) voltage sourcesPos : 17 /D okumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1