Disassembly & Assembly RD 12/RD 12Awc_tx000671gb.fm 1009.23 Removing the Exciter PumpPrerequisites Machine OFF and engine cool Hose plugProcedure Follow the procedure below to remove the exciter pump.1. Place a plastic sheet and a container under the machine to collect any liquid whichdrains off. Dispose of this liquid in accordance with environmental protection legislation.2. Disconnect and cap the outgoing hydraulic line (a).3. Remove the two screws (b) that secure the exciter pump to the drive pump.4. Loosen the hose clamp (c) and pull the exciter motor from the machine. Immediatelyplug (d) the hose.The procedure to remove the exciter pump is now complete.CAUTION! Burn hazard. The engine exhaust pipes are extremely hot while the engine isrunning and for a period of time after the engine has shut down.f Allow the exhaust pipes to cool before performing this procedure.wc_gr004183bacwc_gr004184dc
