RD 12/RD 12A Disassembly & Assemblywc_tx000671gb.fm 959.20 Assembling the Exciter BearingsPrerequisites Front drum removedProcedure Follow the procedure below to assemble the exciter bearings.1. Press new inner bearing races (c2 and k2) onto the exciter.2. Install the outer bearing race into the drive-motor-side bearing flange (b).3. Using Loctite 234 on the six screws (a), secure the drive-motor-side bearing flange tothe drum. Torque the screws to 49 Nm (36 ft.lbs.).This procedure continues on the next page.wc_gr004172k2 c2wc_gr004244iljk 1
