RD 12/RD 12A Safety Informationwc_si000302gb.fm 131.3 Service SafetyA poorly maintained machine can become a safety hazard! In orderfor the machine to operate safely and properly over a long period oftime, periodic maintenance and occasional repairs are necessary.1.3.1 Some service procedures require that the machine’s battery bedisconnected. To reduce the risk of personal injury, read andunderstand the service procedures before performing any service tothe machine.1.3.2 All adjustments and repairs MUST be completed before operation. Donot operate the machine with a known problem or deficiency! Allrepairs and adjustments should be completed by a qualifiedtechnician.1.3.3 Do not attempt to clean or service the machine while it is running.Rotating parts can cause severe injury.1.3.4 Do not crank a flooded engine with the spark plug removed ongasoline-powered engines. Fuel trapped in the cylinder will squirt outthe spark plug opening.1.3.5 Do not test for spark on gasoline-powered engines if the engine isflooded or the smell of gasoline is present. A stray spark could ignitethe fumes.1.3.6 Do not use gasoline or other types of fuels or flammable solvents toclean parts, especially in enclosed areas. Fumes from fuels andsolvents can become explosive.1.3.7 Do not modify the machine without the express written approval of themanufacturer.1.3.8 DO NOT stand under the machine while it is being hoisted or moved.1.3.9 DO NOT get onto the machine while it is being hoisted or moved.1.3.10 DO NOT use the machine as a ladder. Use safe ladders and platformsdesigned for this purpose.1.3.11 DO NOT modify, weld, or drill safety frames (ROPS) fitted as originalequipment. DO NOT loosen or remove bolts. DO NOT weld, drill ormodify a broken safety frame.1.3.12 DO NOT open the hydraulic lines or loosen the hydraulic connectionswhile the engine is running! Before dismantling the hydraulicconnectors or hoses, ensure that all pressure has been bled from thecircuit. Hydraulic fluid under pressure can penetrate the skin, causeburns, blind, or create other personal injury hazards. Set all controls inneutral, turn engine off, and allow the fluids to cool before looseninghydraulic fittings or attaching test gauges.1.3.13 ALWAYS check all external fasteners at regular intervals.WARNING
