RD 12/RD 12A Disassembly & Assemblywc_tx000671gb.fm 739.8 Installing the Rear DrumPrerequisites Crane and appropriate sling Non-drive-motor side drum support installedProcedure Follow the procedure below to install the rear drum.1. Chock the front drum.2. Install the bearing (h) onto the shaft of the drum.3. Position the drum underneath the machine.4. Install the bearing cover (c) to the non-drive-motor side of the drum.5. Apply Loctite 243 to screws (f) and secure the drum support to the machine. Torque thescrews to 79 Nm (58 ft.lbs.).6. Install the metal hydraulic lines (e).This procedure continues on the next page.wc_gr004198h cwc_gr004199fe
