Disassembly & Assembly RD 12/RD 12Awc_tx000671gb.fm 1029.25 Removing the Drive PumpPrerequisites Machine OFF and engine cool Exciter pump removedProcedure Follow the procedure below to remove the drive pump.1. Place a plastic sheet and a container under the machine to collect any liquid whichdrains off. Dispose of this liquid in accordance with environmental protection legislation.2. Disconnect the control cable (a).3. Disconnect and the plug hydraulic lines (b and c).4. Loosen the hose clamp from the hydraulic hose (d).5. Remove the screws (e) that secure the hydraulic pump to the adapter.6. Remove the hydraulic pump (f) from the adapter and immediately plug the hydraulichose (d).The procedure to remove the drive pump is now complete.Burn hazard. The engine exhaust pipes are extremely hot while the engine is run-ning and for a period of time after the engine has shut down.f Allow the exhaust pipes to cool before performing this procedure.wc_gr004186abdce
