Walker MT Detailed Instructions

Also see for MB: Owner's manual Parts and owners manual

Walker MT Detailed Instructions Manual pdf 119 page image

Page: 3-17WALKER MANUFACTURING COMPANYJuly 2006SERVICE INSTRUCTIONSBlade Brake Action - All ModelsModel MS, MW, MC, MD, MTCheck the function of the cutter blade brake (and blow-er brake on GHS models) by engaging the blade clutch(PTO), operating the engine at full throttle, then disen-gaging the clutch and measuring how quickly theblades stop. Watch the rotation of the blade drive shaftand blower pulley as a visual indication that movementhas stopped. If the brake is working properly, all ro-tation will stop five (5) seconds after disengage-ment of the clutch. If the brake system malfunctions -blades do not stop in five (5) seconds - adjust or repairthe brake before operating the mower. Refer to AD-JUSTMENTS of Blade Clutch (PTO) in the ServiceProcedures Section.Model MBCheck the function of the cutter blade brake by engag-ing the blade clutch (PTO), operating the engine at fullthrottle, then disengaging the clutch and measuringhow quickly the blades stop. Watch the rotation of theblade drive shaft as a visual indication that movementhas stopped. If the brake is working properly, all ro-tation will stop five (5) seconds after disengage-ment of the clutch. If the brake system malfunctions -blades do not stop in five (5) seconds - replace thebrake before operating the mower.Brake Band - Model MW(View with PTO Gearbox Assembly Removed)PTO U-Joints - Model MTThe PTO U-joints should be inspected yearly for loose-ness and wear. If either is noticed, the respective shaftor tube should be replaced. A worn U-joint can causevibration and extensive damage to the PTO and deckgearboxes.WARNINGIt is important to check and maintain bladebrake action for safe operation of the ma-chine.PTO GearboxBrake Band Adjustment Nutson These Ends Should BeAdjusted Out Evenly