Walker MT Detailed Instructions

Also see for MB: Owner's manual Parts and owners manual

Walker MT Detailed Instructions Manual pdf 24 page image

Page:1-4WALKER MANUFACTURING COMPANYJuly 2006SERVICE INSTRUCTIONSModel MW, MBThe battery is a completely sealed, non-serviceablebattery.Battery Location - Model MWAll ModelsIMPORTANT: Make sure battery is securely mountedin the frame. A loose battery may cause damage to thecase resulting in acid leakage and severe damage tothe machine. A hazard may be created by damage tocritical working parts and safety systems.Wet Battery Service - MS, MC, MD, MT, MTL, MTEFIIf the battery has been shipped wet, but the electrolytelevel is low or the battery needs to be charged then:1. Fill each battery cell with drinking water to the bot-tom of the vent wells.2. Charge battery. Refer to Battery Charging in thissection.Dry Battery Service - MS, MC, MD, MT, MTL, MTEFITo fill (activate) battery with electrolyte (if battery hasbeen shipped dry):1. Remove the battery hold down bar, disconnect thebattery cables and lift the battery out of the tray.IMPORTANT: Battery must be removed from themower before filling with electrolyte.IMPORTANT: Obtain and use only battery gradesulfuric acid electrolyte with a 1.265 specific gravityto activate the battery. DO NOT use water or anyother liquid during initial activation.2. Remove the filler caps and carefully fill each celluntil the electrolyte is just above the plates.3. After the battery is filled with electrolyte, replacethe filler caps and charge the battery. Refer to Bat-tery Charging.Ref. EngineFront of MowerDANGERActivating a battery can be dangerous.DO NOT attempt to activate the batteryunless you are experienced in battery ser-vice work. The following activation andcharging instructions are provided foruse by a trained battery technician.DANGERBattery electrolyte is a poisonous and cor-rosive sulfuric acid solution.• Avoid spillage and contact with skin,eyes, and clothing - causes severe burns.• To prevent accidents, wear safety gog-gles and rubber gloves when working withelectrolyte.• Neutralize acid spills with baking sodaand water solution.