SOLVING PROBLEMSClearing area 2ALift the green handle. Remove and discard any paper you find inthis area.Clearing areas 3 through 5When paper jams occur in areas 3 through 5, three extra blanksheets are sent through the printer to make sure that the fuser isclean. These sheets are sent to an unused stacker tray andshould be discarded. You are not charged for these sheets. Ifthe job is directed into stacker tray 1 or 2, the discarded copiesare sent to the sample tray. If the job is directed to the sampletray, discard copies are sent to an empty stacker tray.Follow these steps to clear area 3:1. Push and hold the green handle to the right (in the directionof the arrow marked on it).2. Remove and discard any paper found there.3. Release the handle and close the door.XEROX 4050/4090/4450/4650 LPS OPERATOR GUIDE 8-7
