Define Multi PenSets up the line width, color, end style, and joint style pen attributes for HP-GL data formultiple pens. The same parameters will be set for all other pen numbers within thespecified range.SettingsThe settings for this function are as follows.Menu Item DescriptionPen No. Specifies the starting number and the ending number that cover therange of pens that are to be set up. The pen numbers are set withina range of 0 to 98.Width Sets the line width within a range of 0 to 511, where a line width of1 = 0.0635 mm. The actual width of the line will be n × 0.0635,with the line width set to n. The default setting is [2].Text may not print cleanly if the line width is set to [1].Color Sets the line color at [BLACK] or [WHITE].The default setting is [BLACK].End style Sets the end of the line to [SQUARE], [ROUND], [EXTEND] or[TRIANGLE]. The default setting is [SQUARE].Refer to "End style" for further details.Joint style Sets joint processing for lines to [MITER], [ROUND],[UNJOINT], [BEVEL], [TRIANGLE], or [MITERED/BEVELED]. The default setting is [MITER].Refer to "Joint style" for further details.This setting is only valid for HP-GL and HP-GL/2 EA, EP,ER, FP, RA, RR and PE.
