11.4 Printing Using the lp/lpr CommandDetails of each command are explained.Printing (lpr Command)This section explains the printing procedure using the lpr command.Format-PSpecify a logical printer name immediately after P (with no space) to output datato the specified printer.If no logical printer name is specified, the logical printer lpr is selected.-#Specify the number of copies by entering a numeric value from 1 to 99. If 100 ormore is specified, an error message is displayed and the specification iscanceled.If noting is entered, one copy is output.-sSpecify this to transfer a file by a symbolic link without storing in the spool area.Bold characters represent input character strings in each example.Do not delete or modify the file specified by before theprocessing of the print request ends completely.The lpr options other than above are ignored.lpr [-P] [-#] [-s]
