Safety NotesXerox 6204 Wide Format Solution 9Before Using the Machine1Operational Safety InformationTo ensure the continued safe operation of your Xerox equipment, follow these safetyguidelines at all times.Do These:z Always connect equipment to a correctly grounded power outlet. If in doubt, havethe outlet check by a qualified electrician.- This equipment must be connected to a protective grounded circuit, and theequipment is supplied with a plug that has a protective grounding pin. This plugwill only fit into a grounded electrical outlet. This is a safety feature. To avaoid riskof electric shock, contact your electrician to replace the electrical outlet if you areunable to insert the plug into it. Never use a plug that lacks a grounded connectionterminal to connect the product to an electrical outlet.z Always follow all warnings and instructions that are marked on or supplied with theequipment.z Always exercise care when moving or relocating equipment. Please contact yourlocal Xerox Service Department, or your local support organization to arrangerelocation of the product to a location outside of your building.z Always locate the equipment in an area that has adequate ventilation, and has roomfor servicing. See the Install Guide for minimum dimensions.z Always use materials and supplies specifically designed fro your Xerox equipment.The use of unsuitable materials may result in poor performance.z Always unplug this equipment from the electrical outlet before cleaning.Do Not Do These:z Never use a plug that lacks a grounded connection terminal to connect the productto an electrical outlet.z Never attempt any maintenance function that is not specifically described in thisdocumentation.z This equipment should not be placed in a built-in installation unless proper ventilationis provided. Please contact your Authorized Local Dealer for further information.z Never remove covers or guards that are fastened with screws. There are nooperator serviceable areas within these covers.z Never locate the equipment near a radiator or any other heat source.z Never push objects of any kind into the ventilation openings.z Never override or "cheat" any of the electrical or mechanical interlock devices.z Never operate the equipment if you notice unusual noises or odors. Disconnect thepower cord from the electrical outlet and contact your local Xerox ServiceRepresentative or Service Provider immediately.Maintenance InformationDo not attempt any maintenance procedure that is not specifically descrivbed in thedocumentation that is supplied with your copier/printer.z Do not use aerosol cleaners. The use of cleaners that are not approved may causepoor performance of the equipment, and could create a dangerous condition.
