10 Problem Solving164Problem Solving10Problems during CopyingThe following helps you solve problems encountered during copying.Symptoms Check RemedyCopy does notprint at thedesired size.Did you select the originalsize series properly?Select the original size series properly tomatch with the original size.Refer to "Size Series Settings for Originals"(P.31).Did you select the mediasize series properly?Select the media size series properly tomatch with the media size.Refer to "Media Settings" (P.39).Is the original at the correctposition?Load the original correctly.Refer to "Step 3 Scanning the Original" (P.43).Is the original guide at thecorrect position?Correctly set the original guides.Refer to "Step 3 Scanning the Original" (P.43).Is the original folded orbent?Straighten and properly reset the original.Refer to "Step 3 Scanning the Original" (P.43).Original does notfeed into theoriginal feeder.Is the original too small? The minimum size of the original that canbe fed is the width 182mm and the length210mm.Refer to "Usable Originals" (P.30).Unable to copyusing the manualfeed tray(Bypass).Is the paper media loaded inthe manual feed tray at thecorrect position?Correctly select the paper media.Refer to "Using the Manual Feed Tray(Bypass)" (P.36).Original is oftenjammed.Is the original in goodcondition?Insert a usable type of original.Refer to "Usable Originals" (P.30), "Step 3Scanning the Original" (P.43).Is the original too small ortoo thick?The minimum size of the original that canbe loaded is the width 182mm and thelength 210mm. Some thick originals mayrequire removal of the front return guides.Refer to "Usable Originals" (P.30).A corner of theoriginal is folded.Is the original curled? Flatten out the curl and set the originalagain.
