Problems during Printing171Problem Solving10Problems during PrintingThe following helps you solve problems encountered during printing.Symptoms Check RemedyUnable to print. Is the circuit breaker or thepower switch of the machineoff?Turn on the circuit breaker (main powerswitch) and the power switch.Refer to "Power On / Off" (P.25).Is the print mode [Offline]? Press the button, andconfirm [Print mode] in the [MachineStatus] screen. If [Print Mode] is [Offline],select [Online] in the [Print Mode] screen.Is the network cable of themachine disconnected?Connect the network cable of the machine.Does any error occur on themachine?Check the error message, and follow theinstructions to solve the problem.Is the network path of the IPaddress correctly set?Set the network path of the IP addresscorrectly.Is an interrupt operationperforming?Cancel the interrupt operation.Unable to printusing the manualfeed tray(Bypass).Is the specified media sizepaper loaded correctly?Load the correct size paper media inaccordance with the message appears andprint again.Refer to "Using the Manual Feed Tray(Bypass)" (P.36).Paper media isoften jammed orwrinkled.Is the correct type of papermedia used?Load a correct type of paper media.Refer to "Media Type" (P.32).Is the paper media loadedcorrectly?Load the paper media correctly.Refer to "Loading Media" (P.34).Is the media tray setcorrectly?Firmly push in the media tray until it stopsto set it correctly.Refer to "Loading Media" (P.34).Is the paper media damp? Replace with paper media from a newream.Refer to "Loading Media" (P.34).Are the media loaded andmedia settings correct?Correctly select the media size series andmedia type to match with the medialoaded.Refer to "Media Settings" (P.39).Are there any torn pieces ofpaper still remaining insidethe machine or is there aforeign object in themachine?Open the door of the machine or slide outthe media try to remove the torn paper orthe foreign object.Refer to "Paper Jams" (P.176), "LoadingMedia" (P.34).The prints aretoo light.Is the message for loadtoner displayed?Load toner.Refer to "Loading Toner" (P.154).Is the toner densityappropriate?Adjust the toner density.Refer to "Toner Density" (P.128).
