Copying ProcedureXerox 6204 Wide Format Solution 43Copy3Step 2 Entering the QuantityYou can enter up to 99 copies as the quantity.1 Enter the number of copies using the numerickeypad.The number of copies entered appears on the upper rightarea of the touch screen.2 If you enter an incorrect value, press the button to clear the entry, and enter the correctvalue.Step 3 Scanning the OriginalTo scan the original, follow the procedure below.Important • The original may jam if pressure is applied to the top of the original or it is pulled duringscanning.• When originals that contain holes are loaded, make sure that the area with the holes is fed inlast, because the original may jam if the area with the holes is fed in first.1 Align the original with the original guide facedown, and insert the lead edge of the originalinto the machine until it stops feeding. Then themachine starts scanning automatically.• If the scan start mode has been set to [ManualStart], press the button.Important • Hold the original down flat with two hands (oneon either side of the arrow in the graphic) whileit is being fed in to the starting position(to avoid minor "crinkles" that can cause darkareas in the copy). If you release the originalbefore it stops feeding, it may result in a jam.472580369TransmittingMachine StatusLog In/OutJobs in MemoryOriginal/Copy Scan Menu Power SaverClear AllCopy fromStopStartInterruptMedia SettingsMemory. C1Numeric keypadBasic Copy Image Quality More FeaturesMedia Supply Media TypeSelect2 A1Media Cut ModeStandardBondBondVellumFilmReduce / Enlarge100.0%A0 A2More... More...Auto %Auto50.0%Ready to copy 1Qty.1 A0Bond472580369TransmittingMachine StatusLog In/OutJobs in MemoryOriginal/Copy Scan Menu Power SaverClear AllCopy fromStopStartInterruptMedia SettingsMemory. C1 button
