Phaser® 8400 Color PrinterCopyright © 2003 Xerox Corporation. All Rights Reserved.3-21Windows NT 4.xThis topic includes:■ "Preliminary Steps" on page 3-21■ "Quick CD-ROM Install Steps" on page 3-21■ "Other Methods of Installation" on page 3-22■ "Windows NT 4.x Troubleshooting (TCP/IP)" on page 3-24Preliminary StepsThese preliminary steps must be performed for all printers:1. Verify that the printer is plugged in, turned on, and connected to an active network.2. Verify that the printer is receiving network traffic by monitoring the LED’s on the back ofthe printer or on the CentreDirect External Print Server. When the printer is connected to afunctioning network and receiving traffic, its link LED is green, and its amber traffic LEDis flashing rapidly.3. Proceed to “Quick CD-ROM Install Steps” or “Other Methods of Installation” for theinstallation method desired.4. Print a “Configuration Page” and keep it for reference.Quick CD-ROM Install Steps1. Insert the Printer Installer and Utilities CD-ROM into the computer’s CD-ROM drive. Ifyour PC is set to autorun, the installer launches automatically. If it does not launch, do thefollowing:a. Click Start, then click Run.b. In the Run window, type: :\INSTALL.EXE.2. Select your desired language from the list.3. Select Install Printer Driver.4. Click I Agree to accept the Xerox Software License Agreement.5. In the Select Printer dialog box, the default Use Walk-Up Technology (recommendedfor network printers) is selected. Click Next.6. Follow the Use Walk-Up Technology instructions displayed.7. Click Exit Program.NoteIf the Walk-Up Technology dialog box remains onscreen after you have completedSteps 1–6, click the Back button, then click Select from the following discoveredprinters. Follow the onscreen prompts to complete the installation procedure.
