Windows NT 4.xPhaser® 8400 Color Printer3-22Other Methods of InstallationInstall your printer on a Windows NT network using one of these methods:■ Microsoft TCP/IP protocol■ Xerox TCP/IP Port MonitorThe following methods can also be used to monitor or configure your printer:■ A web browser using CentreWare IS if your printer is connected to a Windows NTnetwork with TCP/IP protocol enabled.■ The Xerox CentreWare MC snap-in to Microsoft Management Console for installing ormanaging multiple printers on a Windows NT network with TCP/IP protocol enabled. Seethe CentreWare MC User Guide at www.xerox.com/office.NoteThe CentreWare methods are not discussed in this section. For more informationconcerning CentreWare IS, or CentreWare MC, go to Reference/Connections &Networks/Printer Management Software on the User Documentation CD-ROM.Quick Install Steps (Microsoft TCP/IP Protocol)NoteThis procedure is only performed by the system administrator.1. Right-click the My Network Places icon on the desktop, then click Properties.2. Click the Protocols tab to verify that the TCP/IP protocol has been installed.3. Select the Services tab and verify that Microsoft TCP/IP Printing software is installed. If itis not installed, install it, and then return to this document.Adding the Printer1. Open the Control Panel, then double-click the Printers icon.2. Double-click Add Printer to launch the Add Printer Wizard, then click Next.3. Verify that My Computer is selected, then click Next.4. Click Add Port, then select the LPR Port from the list displayed.5. Click New Port.6. Enter the IP address for your printer and a printer name of 31 characters or less (nospaces).7. Select OK.8. Verify that the new IP address you entered is listed correctly. If the check box next to theIP address is not checked, select the check box, then click Next.
