MacintoshPhaser® 8400 Color Printer3-32Enabling and Using TCP/IPThis section provides installation and troubleshooting steps for Macintosh (Mac OS 9 throughMac OS X, version 10.2).Quick Install Steps for Mac OS 9.xSetting Up the Macintosh Ethernet Port for TCP/IPPerform the following procedure to set up your Macintosh TCP/IP:1. Click Control Panels from the Apple menu.2. Click TCP/IP.3. Click Ethernet from the Connect via menu.4. Specify one of the following methods for the Macintosh to obtain its IP address:■ Manually■ DHCPNoteIf you select to set up the printer manually, specify the IP address in the dialog box.You must also enter information for the Subnet Mask, Router Address, and NameServer Address, if needed5. Close the dialog box.Creating an LPR Printer with LaserWriter 8.5.1 or Higher1. Open the Desktop Printer Utility. (This utility, or an alias to it, can be found in thePhaserTools folder.)2. Click Printer (LPR) in Create Desktop, then click OK.3. Click Change in the PostScript Printer Description (PPD) file.4. Select the appropriate PPD from the list, then click Select. If your printer’s PPD is notlisted, install it from the Printer Installer and Utilities CD-ROM.5. Click Change in LPR Printer Selection.6. Enter information in the following fields:■ Printer Address: Enter the printer's IP address or domain name.■ Queue: Enter PS (use upper-case), then click OK.7. Close the dialog box. When prompted, click Save.8. Enter a name for the desktop printer in Save Desktop Printer As field, then click Save.9. Two methods are available for printing through LPR:■ Use the new Desktop Printer (LPR)■ Use the LaserWriter 8.5.1 printer driver (any printer can be selected). Click File, thenclick Print to select the appropriate LPR printer in the Printer drop-down list.
