Safety16 Xerox ® AltaLink ® C80XX Series Multifunction PrinterUser GuideOperational SafetyYour printer and supplies were designed and tested to meet strict safety requirements. These includesafety agency examination, approval, and compliance with established environmental standards.Your attention to the following safety guidelines helps to ensure the continued, safe operation of yourprinter.Operational Guidelines• Do not remove any paper trays while the printer is printing.• Do not open the doors when the printer is printing.• Do not move the printer when it is printing.• Keep hands, hair, neckties, and so on, away from the exit and feed rollers.• Covers, which require tools for removal, protect the hazard areas within the printer. Do not removethe protective covers.• Do not override any electrical or mechanical interlock devices.• Do not attempt to remove paper that is jammed deeply inside the product. Power off the printerpromptly and contact your local Xerox representative.• Ensure that the rear right cover is attached. Open this cover to connecting an interface cable.Ozone ReleaseThis printer produces ozone during normal operation. The amount of ozone produced is dependent oncopy volume. Ozone is heavier than air and is not produced in amounts large enough to harm anyone.Install the printer in a well-ventilated room.For more information in the United States and Canada, go to www.xerox.com/environment. In othermarkets, please contact your local Xerox representative or go to www.xerox.com/environment_europe.
