TroubleshootingXerox ® AltaLink ® C80XX Series Multifunction Printer 265User GuideTroubleshooting Paper JamsThis section includes:• Multiple Sheets Pulled Together .............................................................................................................................. 265• Jams in the Document Feeder .................................................................................................................................. 265• Paper Misfeeds and Paper Size Jams ..................................................................................................................... 266• Label and Envelope Misfeeds .................................................................................................................................... 266• Paper Jam Message Stays On ................................................................................................................................... 267• Jams During Automatic 2-Sided Printing ............................................................................................................. 267Multiple Sheets Pulled TogetherProbable Causes SolutionsThe paper tray is too full. Remove some of the paper. Do not load paper past fill line.The edges of the paper are not even. Remove the paper, align the edges, and then reload it.The paper is moist from humidity. Remove the paper from the tray, and replace it with new drypaper.Too much static electricity is present. • Try a new ream of paper.• Do not fan transparencies before loading in tray.Using unsupported paper. Use only Xerox approved paper. For details, refer to SupportedPaper on page 169.Humidity is too high for coated paper. Feed paper one sheet at a time.Jams in the Document FeederProbable Causes SolutionsUnsupported paper of the wrong size,thickness, or type.Use only Xerox-approved paper. For details, see SupportedPaper on page 169.Originals are torn, previously stapled, bent, orfolded.Ensure that the originals are not torn, bent, or folded. Ifpreviously stapled, remove all staples and separate the sheetsby fanning them.The documents loaded in the documentfeeder exceed the maximum capacityallowed.Place fewer documents in the document feeder.Improperly adjusted document feeder guides. Adjust the paper guides to fit snugly against the paper loadedin the document feeder.
