Regulatory InformationXerox ® AltaLink ® C80XX Series Multifunction Printer 339User GuideTo save power, you can enable Auto Power Off mode on your device. If Auto Power Off mode is enabled,you can configure the mode as follows:• Always Allowed: The device powers off automatically after the specified time, and the cumulativeLow Power mode and Sleep mode timeouts have elapsed.• Allowed ONLY When Conditions are Met: The device automatically powers off only after timeoutshave elapsed. The device also powers off if Fax, USB Drive, and Wired and Non-Wired Network havenot been activated.To change the Power Saver settings, refer to the User Guide at www.xerox.com/office/ALC80XXdocs.For further assistance, contact your System Administrator or refer to the System Administrator Guide.To enable Auto Power Off mode, contact your System Administrator. For details, refer to the SystemAdministrator Guide at www.xerox.com/office/ALC80XXdocs.To learn more about Xerox participation in sustainability initiatives, go to: www.xerox.com/about-xerox/environment/enus.html.Note: Changing the default Power Saver activation times can result in an overall higher energyconsumption of the device. Before you turn off Power Saver modes or set a long activation time,consider the increase in device power consumption.Default Power Saver SettingsThis device is ENERGY STAR®-qualified under the ENERGY STAR Program Requirements for ImagingEquipment. The transition time from Ready mode to Low Power mode can be set up to 30 minutes.The default value is 2 minutes. The transition time from Low Power mode to Sleep mode can be set up to30 minutes. The default value is 0 minutes. The total transition time from Ready mode to Sleep modecan take up to 60 minutes.To change the Power Saver settings, refer to the User Guide at www.xerox.com/office/ALC80XXdocs.For further assistance, contact your System Administrator, or refer to the System Administrator Guide.Environmental Choice Certified to Office Machines CCD-035This product is certified to Environmental Choice standard for office machines,meeting all requirements for reduced environmental impact. As part ofachieving certification, Xerox Corporation has proven this product meets theEnvironmental Choice criteria for energy efficiency. Certified copier, printer,multifunctional device, and fax products must also meet criteria such asreduced chemical emissions and demonstrate compatibility with recycledsupplies. Environmental Choice was established in 1988 to help consumersfind products and services with reduced environmental impacts. EnvironmentalChoice is a voluntary, multi-attribute, and lifecycle-based environmentalcertification. This certification indicates that a product has undergone rigorousscientific testing, exhaustive auditing, or both, to prove its compliance withstringent, third-party, environmental performance standards.
