Paper and MediaXerox ® AltaLink ® C80XX Series Multifunction Printer 195User GuideGlossy MediaYou can print glossy paper, up to 256 g/m 2 , from any tray. You can print heavyweight glossy paper fromTray 5 only.Note: For best results, load Glossy Cardstock, and Glossy Cardstock Reloaded paper into Tray 5.Guidelines for Printing on Glossy Paper• Do not open sealed packages of glossy paper until you are ready to load them into the printer.• Leave glossy paper in the original wrapper, and leave the packages in the shipping carton untilready to use.• Remove all other paper from the tray before loading glossy paper.• Load only the amount of glossy paper that you are planning to use. Do not leave glossy paper in thetray when you are finished printing. Reinsert unused paper in the original wrapper and seal.• Rotate paper frequently. Long periods of storage in extreme conditions can cause glossy paper tocurl and jam in the printer.• In the print driver software, select the desired glossy paper type or select the tray loaded with thedesired paper.Loading Gloss Paper in Tray 51. Before you load glossy paper, remove all other paper from the tray.2. Load only the amount of paper you plan to use.3. Load the paper with the glossy side or print side down.4. At the control panel, select the correct paper size, type, and color:− Ensure that the paper type is set to Glossy. To select a new paper type, touch Type.− To select a new paper size, touch Size.− To select a new paper color, touch Color.5. To confirm the settings, touch Confirm.
