5 Scan/E-mail116 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 User Guide1. Select [Transfer Protocol] on the[Scan to FTP/SMB] screen.2. Select the required option.3. Select [Save].FTPSpecifies the FTP protocol.SMBSpecifies the SMB protocol.SMB (UNC Format)Specifies the SMB protocol (using the UNC format).NOTE: If Remote Authentication has been enabled, a popup message will prompt theuser to enter a login and password before using the Scan to FTP/SMB feature. Thelogin and password will be passed to the Kerberos server. Only when the user isauthenticated (eg. User xyz really is user xyz) will the feature be made available.Address BookUse this feature to select a destination server from the Address Book. Selecting aserver causes the preset information to be entered into the entry fields: Server, SharedName, Save in, Login Name, and Password. For information on how to registerdestinations, refer to Address Book in the Setups chapter on page 247.1. Select [Address Book] on the[Save in:] screen.2. Perform the necessaryoperations.3. Select [Save].Show DetailsDisplays detailed settings of the selected server.Detailed SettingsUse this feature to assign a file name to a document to be scanned.1. Select [Detailed Settings] on the[Save in:] screen.2. Perform the necessaryoperations.3. Select [Close].
