Common SettingsXerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 User Guide 191Audio TonesUse this feature to select the volume level of tones to be generated at variousoccasions. You can choose different volume levels for each item shown on the screen.1. Select [Audio Tones] on the[Common Settings] screen.2. Use the scroll buttons to switchbetween screens.3. Perform the necessaryoperations.4. Select [Close].Control Panel Select ToneSelect the volume level of the tone generated when an appropriate button on thecontrol panel is pressed and its action is accepted.Control Panel Alert ToneSelect the volume level of the tone generated when an inappropriate button on thecontrol panel is pressed.Machine Ready ToneSelect the volume level of the tone generated when the machine becomes ready tocopy or print, for example, after the power is switched on.Copy Job Complete ToneSelect the volume level of the tone generated when copying finishes successfully.Non-Copy Job Complete ToneSelect the volume level of the tone generated when a job other than copying finishessuccessfully.Fault ToneSelect the volume level of the tone generated when a job did not finish properly.Alert ToneSelect the volume level of the tone generated when a job is suspended due to an error.Out of Paper Warning ToneSelect the volume level of the tone generated when the machine runs out of paper.
