Basic ScanningXerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 User Guide 117File NameSpecify a file name to be assigned to the document. A file name is automaticallyassigned by the machine. To assign a different file name, select [Change Settings] anduse the displayed keyboard.File Name ConflictSpecify one of the following after selecting [Change Settings]. If a file with the samename already exists at the destination, the file will be processed according to thisselection.• Cancel JobDoes not save the file in that destination.• Change Name and SaveSaves the file under a different name. A new file name is created by adding a 3-digitnumber (e.g., 001) to the end of the current file name.• Overwrite Name and SaveOverwrites the old file with the new file.Clear FieldDeletes the entered file name.Change SettingsDisplays the screen keyboard to enter or revise the file name. For more information onkeyboard entry, refer to Keyboard in the Fax/Internet Fax chapter on page 81.KeyboardUse the screen keyboard to enter parameters into the fields. For more information onkeyboard entry, refer to Keyboard in the Fax/Internet Fax chapter on page 81.1. Select an entry field.2. Select [Keyboard] on the [Scanto FTP/SMB] screen.3. Perform the necessaryoperations.4. Select [Save].Basic ScanningThis section describes how to configure the basic scan settings such as scan resolutionand file formats. For more information, refer to the following.Lighten/Darken – page 118
