3 Copy60 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 User GuideNOTE: If you do not use this feature when copying bound documents or copyingdocuments with the cover open, black shadows may appear around the edge or in thecenter of the copies.NOTE: To use this feature, the document orientation must be specified to indicate topof the document for [Original Orientation] on the [Output Format] screen.1. Select [Border Erase] on the[Scan Options] screen.2. Perform the necessaryoperations.3. Select [Save].NormalUse the preset values to select the amount to be erased from the edge or center of thedocuments. Presets are set up by the Key Operator. If you do not want to erase anyedge and/or center width, select [Variable Erase] and select 0.0 using the scrollbuttons.Variable EraseAllows you to adjust the amount of deletion from the edge or center of the documents.Enter the amount you want to erase from the top, bottom, right, left, and center margins.Up to 50 mm (2 inches) can be entered.Margin ShiftThis feature allows you to change the position of the image on an output page.NOTE: To use this feature, the document orientation must be specified to indicate topof the document for [Original Orientation] on the [Output Format] screen.NOTE: The amount of the image shift depends on the size of paper loaded in themachine.NOTE: When [Mixed Size Originals] is selected, the amount shifted is determined bythe image position of the first sheet and is applied to all subsequent sheets of thedocuments.1. Select [Margin Shift] on the[Scan Options] screen.2. Select the required option.3. Select [Save].No ShiftDisables the feature.
