11 Setups218 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 User GuideAllocate MemoryUse this feature to specify memory capacities required for printing and for the receivebuffer for each interface.1. Select [Allocate Memory] on the[Print Mode Settings] screen.2. Use the scroll buttons to switchbetween screens.3. Perform the necessaryoperations.4. Select [Close].PostScript MemoryAllows you to change the PostScript memory capacity within the range of 8.00–96.00MB in 0.25 MB increments using the scroll buttons. The currently available memory willbe displayed at the top of the screen with the following message: “Memory Available:XXX MB.”Receiving Buffer - ParallelAllows you to change the input buffer memory capacity when using the parallel portwithin the range of 64–1,024 KB in 32 KB increments using the scroll buttons. Thecurrently available memory will be displayed at the top of the screen with the followingmessage: “Memory Available: XXX MB.”Receiving Buffer - USBAllows you to change the input buffer memory capacity for USB interface within therange of 64–1,024 KB in 32 KB increments using the scroll buttons. The currentlyavailable memory will be displayed at the top of the screen with the following message:“Memory Available: XXX MB.”Receiving Buffer - LPD SpoolAllows you to change the input buffer memory capacity for LPD interface. The currentlyavailable memory will be displayed at the top of the screen with the following message:“Memory Available: XXX MB.”OffAllows you to change the memory capacity within the range of 1024–2048 KB in 32 KBincrements using the scroll buttons.MemoryAllows you to change the memory capacity within the range of 0.50–32.00 MB in 0.25MB increments using the scroll buttons.
