Preparing for installationInstallation Planning Guide 4-5Connectivity requirementsAn Ethernet local area network (LAN) running TransmissionControl Protocol/Internet Protocol (TCP/IP), AppleTalk, or NovellNetWare software is the network communication system used totransport documents from the client workstation to the printingsystem.Ethernet specificationsThe Ethernet connection to the controller processor must becompatible with the Institute of Electrical and ElectronicsEngineers (IEEE) 802.3 standard.The Ethernet interface on the controller processor is a 10 Mb/sectwisted pair standard (10BaseT and 100BaseT). Attachment UnitInterface (AUI) Coax Ethernet is enabled with an adapter cable.Install • Ensure supplies are available.• Ensure system administrators are availableduring software installation.• Provide applicable completed worksheets fromthe Getting Ready for Installation document.If the NPS/IPS Extension option is beinginstalled, provide applicable information asdirected in the 96/4635/180 NPS/IPS InstallationPlanning Guide.• Install printing system hardware and software.• Have operators available for training.• Check documentation and software kits forcompleteness.• Have test jobs ready to run.• Provide stocks needed for default inputconfiguration.• Obtain and enable software license.CustomerCustomerCustomerXeroxCustomerCustomerCustomerCustomerCustomer_________________________________________________________________________________Post-install• Become familiar with support services available.• Establish supplies maintenance procedure.• Provide ongoing system maintenance.• Adjust the printer alignment and magnification.• Order additional documentation, as necessary.CustomerCustomerCustomer and XeroxXeroxCustomer_____________________________________________Table 4-1. Installation planning checklist (Continued)Week Activity ResponsibilityDatecompleted
