Controller requirements and specifications5-8 Installation Planning GuideController hardware specifications and requirements summaryThe following tables summarize the specifications and electricalrequirements of your controller hardware components.For a summary of printer hardware specifications andrequirements, refer to the “Printer specifications andrequirements” chapter of this guide. Contact your local Xeroxrepresentative if you have questions not specifically addressedin this guide.Table 5-2. Sun Blade 1000/2000 specificationsDeviceDimensions (depth,width, height) WeightHeatdissipation Power requirements Cable lengthsStand d=35.5 in / 90.2 cmw=30 in / 76.2 cmh=38.25 in / 97.2 cmNOTE: Add 3 in /7.62 cm to stand’sdepth with channelinterface board andchannel cableconnector box.195 lbs /88.6 kg--- --- ---Processor d=25 in / 63.5 cmw=10 in / 25.4 cmh=17.75 in / 45.1 cm70 lbs /31.8 kg1,100 BTUper hour60 Hz:100 to 240 VAC,15 amp, 0.4 KVA,5-15 NEMA50 Hz:100 to 240 VAC,15 amp, 0.4 KVAPower: 8 ft. /2.4 mInterface toprinter:20 ft. / 6.1 musable lengthMonitor d=10 in / 25.4 cmw=17.5 in / 44.5 cmh=18.5 in / 47 cm18 lbs /8.2 kg408 BTUper hour100-120 ~ VAC,1 phase, 50-60 Hz,3.0 amp, 0.4 KVA200-240 ~ VAC,1 phase, 50-60 Hz,2.0 amp, 0.4 KVAVideo cable toprocessor:46 in / 1.17 mQuarter-inchcartridgetape driveW=7.5 in / 19 cmH=2.7 in / 7 cmD=13 in / 33 cm8.4 lbs /3.8 kg--- 100-240 VAC,47-63 Hz,max. 850 ma - 1.45ampSCSI cable toprocessor oradditional SCSIdevice:2.62 ft / 0.8 m18/36 trackcartridgetape drive(optional)W= 8.54 in / 21.7 cmH= 5.39 in / 13.7 cmD= 21.9 in / 55.6 cm31 lbs /13.4 kg--- 88-264 VAC,48-62 Hz,max. 35 ampSCSI cable toprocessor oradditional SCSIdevice:16.4 ft / 5 m,32.8 ft / 10 m, and65.6 ft / 20 m
