49 - Sending a faxTo specify the setting for Junk Block,do the following:1. In Fax mode, use the <S/T>buttons to select [ConfigurationFAX] function.2. Press and the LCD shows[FAX Config -Dial type].3. Use the <S/T> buttons to select[Fax Config - Junk Block].4. Use the <W/X> buttons to turnthe Junk Block on/off.5. Press to confirm.To specify the setting for Call Diag,do the following:1. In Fax mode, use the <S/T>buttons to select [ConfigurationFAX] function.2. Press and the LCD shows[FAX Config -Dial type].3. Use the <S/T> buttons to select[Fax Config - Call Diag].4. Press to confirm.Auto-redialTo configure auto dial setting, do thefollowing:1. In Fax mode, use the <S/T>buttons to select [ConfigurationFAX] function.2. Press and the LCD shows[FAX Config -Dial type].3. Use the <S/T> buttons to selectFax Config - Redial attempt.4. Use the <W/X> buttons to adjustthe value from 0 to 9.5. Press to confirm.Transmitting senderinformationTo enable the sender informationwhen sending a fax, do the following:1. In Fax mode, use the <S/T>buttons to select [FAX Function- Forwarding] and press .2. Use the <S/T> buttons to select[Fax Config - Fax Footer].3. Use the <W/X> buttons to turnthe Fax footer on/off.4. Press to confirm.Incoming modeYou can specify the number of ringsbefore answering the phone toreceive a fax document.To specify the number of rings, dothe following:1. In Fax mode, press the button and use the <S/T> but-tons to select [Answer phone]option.2. Choose [Number of Ring] andpress to confirm.3. Use the <W/X> buttons to adjustthe number of rings. The valuecan be set from 1 to 15.4. Press to confirm your set-ting.5. Press <S> to return to [READY]mode.
