Advanced functions - 54Copy settingsYou can adjust the copy size by aspecific zoom ratio or a specific per-centage for enlargement or reduction(25 to 400%). The default zoom ratiois set to 100%.To adjust the copy size, do the fol-lowing:1. Make sure the DocuPrint C2090FS is in Copy mode. If not, pressthe button on the controlpanel.2. Press the button anduse the <S/T> buttons to select[Enlarge/Reduce] option.3. Choose [Enlarge/Reduce] andpress the button to con-firm.4. Use the <W/X> buttons to adjustthe zoom ratio of your copy. Youcan also use the number keypadto enter a specific zoom percent-age.5. Press the button to con-firm your setting.6. Press the <S> button to returnto [READY] mode.To specify special copy functionssuch as 2 in1, Frame Erase, BackRemove, or Image Shift, do the fol-lowing:1. In Copy mode, use the <S/T>buttons to select [Copy func-tion] to access copy functionsubmenu.2. Use the <W/X> buttons tochoose the special copy functiondesired:• 2 in 1 (ADF only)• Frame Erase removes framewhen copying the document• Back Remove removes back-ground when copying the doc-ument• Image Shift (none/center/left/right/up/down/shift value [1-50mm])3. Press the button to con-firm your setting.4. Press the <S> button to returnto [READY] mode.
