Control Panel MenusPhaser 6500 Color Laser PrinterUser Guide102Tray Settings MenuUse this menu to configure settings for each of the paper trays in the printer.When the size or type of paper loaded is different from the setting, print quality can be reduced orpaper jams can occur. It can also cause paper to jam in the printer. Specify the correct paper type andsize.When the optional 250-sheet feeder is installed, and the Paper Tray setting of the driver is set to AutoSelect:• For the PCL driver, the printer uses the tray selected in the PCL Setup menu of the control panel. Fordetails, see Printing Options for Windows PCL Driver on page 63.• For the PostScript driver, the printer uses the tray selected in the PostScript Setup menu at thecontrol panel. For details, see Printing Options for Windows PostScript Driver on page 62.When the paper size and type settings for the trays are the same, printing is uninterrupted when thepaper runs out in the specified tray, printing is uninterrupted. Printing continues by changing to theother tray when it is installed.Tray 1 SettingsItem DescriptionPaper Type Specifies the type of paper loaded in the tray.• Plain• Bond• Light Card• Heavy Card• LW Gloss Card• HW Gloss Card• Envelope• Letterhead• Hole Punched• Recycled• Colored• Special
