Control Panel MenusPhaser 6500 Color Laser PrinterUser Guide97Maintenance Mode MenuUse this menu to configure color registration and to reset defaults.Odd Page 2-Sided(Phaser 6500DN printerconfiguration only)If the optional duplex unit is installed, this item tells the printer how tohandle the last odd page in a 2-sided print job.• 1-sided• 2-sidedPower On Wizard Resets the Power On Wizard. The first time the printer is turned on, a specialmenu appears on the printer control panel. Use it to configure initialsettings such as language, default paper size, and network settings. Thissetting enables the administrator to reset the Power On Wizard so that thespecial menu appears when the printer is turned on.Item DescriptionF/W Version Displays the current firmware version installed in the printer.Auto Regi Adj. Auto Registration Adjust. When On (the default), the color registration isadjusted automatically.Adjust Color Regi. Adjust Color Registration. Used to correct the color registration betweencolors. For details, see Color Registration on page 136.• Auto Adjust: Use to force an automatic color registration correction.• Color Regi Chart: Prints the color registration chart used to check forcorrect color registration.• Enter Number: Use to select and correct color registration numbers.• Fast Scan (1): For setting horizontal color registration, or Slow Scan (2)for setting vertical color registration.Clear Developer Resolves print-quality defects associated with charge problems afterhigh-coverage print jobs.Toner Refresh Resolves print-quality defects associated with charge problems afterlow-coverage jobs.IU Refresh (Imaging UnitRefresh)Helps improve imaging unit operation by performing a density and colorcurve calibration.Init Print Meter Initialize Print Meter. Resets the Print Meter.Initialize NVM Resets the settings in the nonvolatile memory (NVM), except for thenetwork settings, to their defaults. NVM is memory that stores the printersettings even after the power is turned off. After selecting this option andrestarting the printer, all the menu settings are reset to their default values.Note:• You cannot execute the Initialize NVM setting during printing.• After changing this setting, turn off the printer and then turn it onagain to activate the change.Item Description
