PrintingPhaser 6500 Color Laser PrinterUser Guide78Printing Custom SizesThis section includes:• Defining Custom Paper Sizes on page 78• Printing on Custom-size Paper on page 79Note: Custom-size paper can be loaded into all trays.Defining Custom Paper SizesThis section includes:• Defining the Custom Page Size in the PostScript Driver on page 78• Creating a Custom Paper Size for the PostScript Driver on page 79• Creating a Custom Paper Size for the PCL Driver on page 79Notes:• The custom size defined must be within the maximum and minimum size ranges for the printerpaper tray you are using. For details, see the custom size paper ranges given for each tray inSupported Paper on page 48.• You can create custom paper sizes for use with both the PostScript and PCL print drivers, but themethod for each is different. For optimum success, follow the instructions carefully.• If you get an error message when creating a custom size, you could lack permission to savecustom paper sizes on your computer system. See your system administrator for help.Defining the Custom Page Size in the PostScript DriverNote: This method does not allow you to save the custom size under a unique name in the printdriver. You can save only one custom page size at a time in the PostScript Custom Size Settingswindow of the print driver. Once saved, the dimensions are retained until you change them. Youcan create a custom paper size for the PostScript driver and save it under a unique name for repeatuse. For instructions, see Creating a Custom Paper Size for the PostScript Driver on page 79.1. Open the settings of the PostScript print driver:• In Windows, navigate to your printer directory or list and then right-click the Phaser 6500PostScript driver and select Properties. In the Properties dialog box, click the PrintingPreferences button.• In Macintosh, from the Print menu of the application, select the Phaser 6500 printer and thenclick the Properties button.2. In the Paper/Output tab of the print driver, from the Paper Size list, select Custom Page Size.3. In the PostScript Custom Size Settings dialog box, select the units of measurement to use forcreating the page size. In the Custom Size Settings section, specify the size for the short edge(width) and the long edge (length) of the paper. Click OK.4. In the Printing Preferences dialog box, click OK.To change the custom size, in the Paper/Output tab, click the Edit button below the Paper Size field.Make the desired changes in the dialog box. Save your changes in all applicable dialog boxes.
