Wireless ConnectivityXerox® Phaser® 3020User Guide14Wireless ConnectivityThe Phaser 3020BI is compatible with 802.11 (Wi-Fi ® ) wireless networks. The location where themachine is installed must be covered by an 802.11 wireless network. This is typically provided by anearby wireless access point or router, which is physically connected to the wired Ethernet that servesthe building.The machine supports connectivity via a wireless only connection.Note: Performing the driver installation at this time may aid wireless setup. Refer to Printer Drivers.To configure Wireless Connectivity, use the Xerox Easy Wireless Setup. For instructions, see WirelessSetting Program.To set the Ethernet Speed using CentreWare Internet Services, refer to Setting the Ethernet SpeedUsing CentreWare Internet Services.Print a Configuration ReportThe Configuration Report details the machine software versions and network settings configured forthe machine.At the printer control panel, press the WPS button for 10 seconds.
