Security at XeroxXerox® Phaser® 3020User Guide66Security at XeroxFor the latest information on securely installing, setting up and operating your machine see the XeroxSecurity Information Web site located at www.xerox.com/security.Security SettingsTo prevent unauthorized changes to printer settings, ensure a login ID and password areentered in theSystem Administrator area.Administrator Accounts1. At your workstation, open the Web browser and enter the IP Address of the machine in theAddress Bar.2. Press Enter.3. Select Properties.4. If prompted, enter the Administrator User Name (admin) and Password (1111), and select Login.Select Properties.5. In Security on the left hand side select System Security.6. Select System Administrator.7. If required, enter Administrator details for:• Name• Phone Number• Location• E-mail Address8. The WebUI Access Control check box controls access to the Internet Services screen. SelectEnable, if required.9. To change the Administrator Password, select the Change Password box and enter the requiredLogin ID and Password. The defaults are admin and 1111, respectively.10. Select the Advanced button for Advanced Access Control.11. Select Protect Login IPv4 Address if required, and enter the required login IP address that youwant to protect in the IPv4 Address box.12. Select the required option for Login Failure Policy. The options are: Off, 3 times, and 5 times.13. Select the required number of minutes from the Auto Logout menu.14. Select Security Settings Reset to enable this option if required.15. Select Save.16. Select Apply to save the changes.17. Select OK when the acknowledgement message displays.
