802.1X AuthenticationXerox® Phaser® 3020User Guide79802.1X AuthenticationThis is the procedure to follow to install and setup 802.1X Authentication:OverviewThe Xerox machine supports IEEE 802.1X Authentication via Extensible Authentication Protocol (EAP).IEEE 802.1X ensures all machines on the network are authenticated and authorized to use thenetwork. 802.1X can be enabled for machines connected through wired Ethernet networks.The Administrator can configure the machine to use one EAP type. EAP types supported on themachine are:• EAP-MD5• PEAP• EAP-MSCHAPv2• EAP-TLSInformation ChecklistBefore starting ensure that the following items are available and/or the tasks have been performed:• 802.1X authentication must be supported on the network where the machine is connected.• Ensure that your 802.1X Authentication Server and authentication switch are available on thenetwork.• Create a User Name and Password on your Authentication Server that will be used to authenticatethe machine.Enable 802.1X Using CentreWare Internet ServicesAuthentication via TLS requires a Device Certificate to be configured or uploaded to the machine. Forinstructions, refer to Access the Machine Digital Certificate Management Screen.Authentication via PEAP and TLS require a Root Certificate to be uploaded to the machine. Forinstructions refer to Install Root Certificate.1. At your workstation, open the Web browser and enter the IP Address of the machine in theAddress Bar.2. Press Enter.3. Select the Properties icon.4. If prompted, enter the Administrator User Name (admin) and Password (1111), and select Login.Select Properties.5. In the Security link on the left hand side select the Network Security link.
