Network InstallationXerox® Phaser® 3020User Guide18Network InstallationTCP/IPThese instructions show you how to configure the following via CentreWare Internet Services:• TCP/IP v4 and v6• Domain Name• DNS• Zero Configuration NetworkingThe machine supports TCP/IP versions 4 and 6. IPv6 can be used instead of or in addition to IPv4.IPv4 and IPv6 settings can be configured via a web browser using CentreWare Internet Services. Toconfigure TCP/IP settings using CentreWare Internet Services, refer to Configure TCP/IP Settings usingCentreWare CentreWare Internet Services.Configure TCP/IP Settings using CentreWare Internet ServicesIPv41. At your workstation, open the Web browser and enter the IP Address of the machine in theAddress Bar.2. Press Enter.3. Select Properties.4. If prompted, enter the Administrator User Name (admin) and Password (1111), and select Login.Click Properties.5. In Network Settings select TCP/IPv4 from the directory tree. The TCP/IPv4 page displays.6. In the Assign IPv4 Address menu, select Automatically or Manually.7. If Manually is selected, in the TCP/IP Settings area enter details of the machine in the followingfields:a. IPv4 Addressb. Subnet Maskc. Gateway AddressIf Automatically is selected, select BOOTP or DHCP.Notes:• If BOOTP or DHCP mode is selected, you cannot change the IP Address, Network Mask,or Router/Gateway Address. Select Auto IP if required.• New settings will not be applied until the machine is rebooted. Changing the machine’sTCP/IP setting may cause you to lose your connection to the machine.8. In the Domain Name area:a. Enter a domain name in the Domain Name field.b. Enter an IP address in the Primary DNS Server and Secondary DNS Server fields.
