Phaser 3100MFP/X- 6 -1 - Security - Software use license - Environment - Licenseplug is provided with this product. It is designed to be connected to a compatible modular jack that is alsocompliant. See installation instructions for details.You may safely connect the machine to the following standard modular jack: USOC RJ-11C using the complianttelephone line cord (with modular plugs) provided with the installation kit. See installation instructions for details.The Ringer Equivalence Number (or REN) is used to determine the number of devices that may be connected toa telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to anincoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the numberof devices that may be connected to a line, as determined by the total RENs, contact the local TelephoneCompany. For products approved after July 23, 2001, the REN for this product is part of the product identifier thathas the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03is a REN of 0.3). For earlier products, the REN is separately shown on the label.If this Xerox equipment causes harm to the telephone network, the Telephone Company will notify you in advancethat temporary discontinuance of service may be required. If advance notice isn't practical, the TelephoneCompany will notify the customer as soon as possible. Also, you will be advised of your right to file a complaintwith the FCC if you believe it is necessary.The Telephone Company may make changes in its facilities, equipment, operations or procedures that could affectthe operation of the equipment. If this happens the Telephone Company will provide advance notice in order foryou to make necessary modifications to maintain uninterrupted service.If trouble is experienced with this Xerox equipment, for repair or warranty information, please contact theappropriate service center; details of which are displayed either on the machine or contained within the user guide.If the equipment is causing harm to the telephone network, the Telephone Company may request that youdisconnect the equipment until the problem is resolved.Repairs to the machine should be made only by a Xerox representative or an authorized Xerox service agency.This applies at any time during or after the service warranty period. If unauthorized repair is performed, theremainder of the warranty period is null and void. This equipment must not be used on party lines. Connection toparty line service is subject to state tariffs. Contact the state public utility commission, public service commissionor corporation commission for information.If your office has specially wired alarm equipment connected to the telephone line, ensure the installation of thisXerox equipment does not disable your alarm equipment. If you have questions about what will disable alarmequipment, consult your Telephone Company or a qualified installer.CanadaThis product meets the applicable Industry Canada technical specifications.NOTE: The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of themaximum number of terminals allowed to be connected to a telephone interface. The termination on an interfacemay consist of any combination of devices subject only to the requirement that the sum of the Ringer EquivalenceNumbers of all of the devices does not exceed 5.Repairs to certified equipment should be coordinated by a representative designated by the supplier. Any repairsor alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunicationscompany cause to request the user to disconnect the equipment.Users should ensure for their own protection that the electrical ground connections of the power utility, telephonelines and internal metallic water pipe systems, if present, are connected together. This precaution may beparticularly important in rural areas.CAUTION: Users should not attempt to make such connections themselves, but should contact theappropriate electric inspection authority, or electrician, as appropriate.