Phaser 3100MFP/X- 63 -12 - PC FeaturesCompanion MonitorGraphical presentationRun the application by clicking on the X EROX C OMPANIONM ONITOR icon located on your desktop or from the menuS TART >ALLP ROGRAMS > X EROX C OMPANION S UITE >P HASER 3100 MFP > C OMPANION M ONITOR.From this screen you can monitor the information orconfigure your machine from the tabs:• D EVICE SELECTION: Displays the list of devicesmanaged by the PC.• C OMPANION: Presents the machine screen (USBconnection only).• C ONSUMABLES: Displays the consumables status.Device managementThis tab shows the list of devices managed by the PC.Selecting the current deviceOnly one device at a time may be connected to the PC.The current device may be selected by clicking on theradio button corresponding to the device.Status of the connectionThe status of the connection between the current deviceand the PC is indicated by a colour. The following tabledefines the possible states of the connection.Device parameters1 Select a device by clicking on its line in the list andclick on P ROPERTIES to configure the scanningparameters to be applied for this device when youuse the S CAN TO function.2 Select the desired scan MODE in the drop-downmenu.Colour StateYellow Connection in progress.Green Connection established.Red The PC cannot connect to the device.Check the USB connection.
