Control PanelPhaser® 4510 Laser Printer1-91. On the control panel, select Information, and then press the OK button.2. Select Information Pages, and then press the OK button.3. Select Configuration Page or Supplies Usage Page, and then press the OK button toprint.Note: You can also print information pages from CentreWare Internet Services (IS) and fromthe printer driver.Sample PagesYour printer comes with a set of sample pages that demonstrate different printer functions.To print the sample pages:1. On the control panel, select Information, and then press the OK button.2. Select Sample Pages, and then press the OK button.3. Select the desired sample page, and then press the OK button to print.See also:Advanced Features Guide at www.xerox.com/office/4510supportPower Saver SettingsFactory Default:■ Power Saver: On■ Power Saver Timeout: 4 minutesYou can change the default power saver time on the control panel or through CentreWare IS.Using the Control Panel:1. On the control panel, select Printer Setup > Printer Controls, then press the OK button.2. Verify that Power Saver is On. If Power Saver is Off, then select Power Saver and pressthe OK button to switch between Off and On.3. Select Power Saver Timeout to select the new time.4. Press the OK button.Using CentreWare IS:1. Launch your web browser.2. Enter the printer’s IP address in the browser’s Address field.3. Select Properties.4. Select the General folder on the left nagivation panel, then click Printer Defaults.5. In the User Preferences section, set the Power Saver option to On.6. Select the new time from Power Saver Timeout.7. Click the Save Changes button.
