Loading PaperPhaser® 4510 Laser Printer3-7Loading PaperThis section includes:■ Loading Paper Guidelines on page 3-7■ Loading Paper in Tray 1 on page 3-8■ Loading Paper in Tray 2, 3, or 4 on page 3-12■ Tray 1 Mode and Tray 2-N Mode on page 3-17Loading Paper GuidelinesAfter loading any tray and adjusting the paper guides, set the paper type and size as required atthe control panel. All trays require control panel settings for both paper type and size.■ Do not overload the paper tray. See the tray label for the maximum fill line indicators.■ If excessive jams occur, turn the paper or media over. If jams continue to occur, use paper,transparencies, or other specialty media from a new package.■ Use only paper envelopes. Do not use envelopes with plastic windows or metal clasps.■ Only use paper, transparencies, or specialty media that is flat. If frequent jamming occurswith card stock or heavier paper that is less than 175 mm (7 in.) long, reduce the numberof sheets in the tray.Tray 1Top fill line - Maximum fill line for paper.Lower fill line - Maximum fill line for transparenciesand envelopes.Trays 2-41 - Maximum fill line for paper.2 - Maximum fill line for envelopes.3 - Maximum fill line for transparencies.4510-043 4510-151123
